Skip to content

Earthing: how to check it, and what to do when there isn't any

Two-pin sockets, or three-pin sockets that nobody knows are connected to anything? Earthing can be checked, and the solution mostly depends on one thing: whether you live in an apartment or a house.

The earth connects your installation to the ground. If an appliance develops a fault and its metal casing becomes live, the current flows away through the earth wire instead of through the person touching it, and the RCD cuts the power straight away. Without an earth, that current waits for someone to touch the appliance to find a path.

Many older homes have no earth, or not everywhere. That's no reason to redo everything, but it does need sorting out, and the way to do it isn't the same in an apartment and in a house.

How to tell whether you have an earth

Two-pin sockets, with no earth pin, have no earth. With three-pin sockets it's less simple: a socket with an earth pin doesn't prove the earth is there. In installations that have been reworked over the years, we find new sockets fitted to old wires, with an earth pin connected to nothing. We cover this on our page about adding a socket too.

A first clue is in the panel. The green and yellow earth wires land on a terminal bar, which is itself connected to a thicker wire running to the earth electrode. If there are no green and yellow wires and no bar, there is no earth. The plug-in testers sold in shops give an indication, not a measurement.

The real answer is a measurement. We measure the earth resistance with a dedicated instrument, and check that every socket is properly connected to it. We aim for under a hundred ohms: above that, the earth exists but protects poorly.

In an apartment: the building's earth

In a block of flats, you don't create your own earth. It runs through a shared conductor, the earth riser, which goes through the common parts down to the building's earth electrode. If there is one, we connect your panel to it, connect your circuits, and the problem is solved.

If the building has none, the solution isn't inside your apartment. Creating an earth electrode and a riser is a matter for the co-ownership: it's an item for the agenda of the general meeting, not a line on your quote. It's dealt with case by case, depending on the building, and we tell you at the first visit. If the residents' council wants to go ahead with the work, we prepare a quote it can present at the meeting, as explained on our page for co-ownership electrical work. For the rest of the work in an older building, see our page on rewiring an old apartment.

In a house: the earth rod

In a house, the earth is yours, and we create it. We drive an earth rod into the ground, sometimes several, and connect it to the panel with a cable and a test link, used to measure the earth later. When there's groundwork going on, we can also lay a foundation earth loop: a bare copper cable running around the foundations.

Then we measure. Dry, sandy or rocky ground conducts poorly. If the reading is too high, we add rods, spaced apart, or drive them deeper. Creating an earth usually takes half a day, and it's the first item when rewiring a house: we go into detail on our page about rewiring a house.

Until there's an earth: the 30 mA RCD

A 30 mA residual-current device cuts the power as soon as some current escapes from the circuit, through a person for example. So it protects people, even without an earth, and it's the first thing to check in a home that has none.

But it doesn't replace the earth. With an earth, a faulty appliance trips the RCD straight away. Without one, nothing happens until someone touches the appliance, and that person takes the current until the RCD cuts out. If yours trips for no obvious reason, our page on an RCD that keeps tripping explains how to find the leak.

No earth doesn't mean redoing everything

A missing earth doesn't, on its own, justify redoing the whole installation. We start by looking at what your home allows: connecting to the building's earth, an earth rod, or 30 mA RCDs while the co-ownership makes up its mind. Redoing the installation is discussed for other reasons, such as wires that are too thin or a fuse box. That's what our page on electrical code compliance is about.

In a bathroom, earthing goes together with supplementary bonding: a wire linking the metal parts, pipes and bath, to each other and to the earth. When selling or letting, a missing earth is also one of the anomalies flagged by the electrical inspection.

What it costs

It depends on the case. Connecting to the building's riser, an earth rod in a garden or circuits to connect one by one don't cost the same. We measure your earth during a visit, then you receive a detailed quote, so you know the amount before any work starts. Our prices are online, and to book a visit, contact us.

Request your free quote. Reply within 48h, detailed quote within a week.

Request a quote

Frequently asked questions

How do I know if my home has an earth?

Two-pin sockets have none. For three-pin sockets, look at the panel: green and yellow wires landing on a terminal bar are a good sign. But only a measurement tells you whether the earth is properly connected, and whether it really protects.

What is an earth rod?

A metal rod driven into the ground and connected to the panel, which acts as the earth electrode for a house. We fit one or more depending on the ground, then measure the earth resistance: we aim for under a hundred ohms.

My apartment has no earth, what can I do?

If the building has an earth riser, we connect your panel to it. If not, creating an earth is up to the co-ownership and is decided at the general meeting. In the meantime, 30 mA RCDs protect people, without replacing the earth.

Does a 30 mA RCD replace earthing?

No. It protects people by cutting out as soon as current escapes. But without an earth, a faulty appliance stays live until someone touches it. The two work together.

Does a missing earth mean redoing everything?

No. A missing earth is dealt with case by case: connecting to the building's earth, an earth rod for a house, RCDs in the meantime. Redoing the whole installation is decided for other reasons.

Request a quote

Tell us about your project, we will get back to you shortly.

Thank you, we will reply shortly.
An error occurred. Please call us directly.
📞 06 70 54 03 91