When the whole home goes dark, the cut has three possible sources: the grid, your electricity contract or your own installation. Depending on which, it isn't the same person who can get the power back. The checks below need no tools, just your phone's torch, and they're in the order we'd take you through them if you called us. If only one room has lost power, see our page on a socket that isn't working instead.
See whether the neighbours have lights
Look in the stairwell, at the neighbours', at the windows across the street. If everything around you is dark, the fault is on the grid, and neither you nor an electrician can do anything about it. Enedis, the network operator, sends its teams. Its fault line answers 24/7 on 09 72 67 50 75 for Paris (for the Hauts-de-Seine, replace 75 with 92).
Only your home? Check the meter
If you have a Linky meter, the green box, press one of its buttons. What the screen says tells you where to go next:
- The screen stays dark: the meter has no supply, so the problem lies before your home. It may be a grid fuse that has blown. You can't get to it, and neither can we: call the Enedis fault line.
- The screen shows "PUISS DEPASSEE": you've drawn more power than your contract allows. Switch off the oven, the hob or a heater, then hold the + button for a few seconds. If it keeps happening, see how to increase your power supply.
- The screen asks you to contact your supplier: the cut comes from your contract, see further down.
- The screen lights up with no particular message: the cut comes from your installation. Move on to the main service breaker.
If you have an older meter, go straight to the main service breaker.
Find and reset the main service breaker
In French it's the disjoncteur d'abonné: the big white or black box, with a grey lever or two buttons, one red and one black. It sits near the meter or the panel, often in the hallway or in a cupboard. If you can't find it, look harder: there is always one.

If it has tripped, switch it back on. If the power comes back and stays on, it was probably a passing overload. Make a note of what was running at the time: if it happens again, that's the most useful clue.
If you can't get to the meter, the same move also resets the Linky: switch the main service breaker off, wait three seconds, then switch it back on.
If it trips straight away, find the faulty circuit
An appliance or a circuit in your home is tripping everything. You can find it at the panel, and sometimes a phone call is enough to track it down together:
- At the panel, switch off all the breakers and all the RCDs. If you still have fuses, pull them out.
- Reset the main service breaker. If it won't stay on with everything off, don't force it: call Enedis.
- If it stays on, switch the RCDs back on, then the breakers one at a time, leaving a few seconds between each.
- When everything trips again, you've found the faulty circuit. Leave that one off, reset, then switch the others back on.
The rest of the home gets its power back straight away. Only the faulty circuit stays off, and it can wait until we come to repair it. If it's the fridge's circuit, an extension lead from another room will do in the meantime.
If that circuit feeds an appliance that plugs in, a washing machine for example, unplug it and switch the breaker back on. If it holds, it's the appliance. If not, the fault is in the wiring, and finding it is our job. Our pages on a breaker that keeps tripping and an RCD that keeps tripping go further.
Everything's on and still nothing: think of your contract
Nobody else is affected, the main service breaker and the panel are on, and still no power? Look at your bills. An unpaid bill can lead to a cut, and a payment made in the last few days doesn't always stop it. If you've just moved in, check that a contract is open in your name: the supply can be cut when the previous occupant's contract ends. In those cases, call your electricity supplier, whose number is on your bills. An electrician can't do anything about it.
If everything's in order on that side, call the Enedis fault line.
Signs that mean you stop everything
A smell of burning, smoke, a panel that's hot or crackling: don't reset anything. Switch off the main service breaker if you can reach it safely, then call us. If there's smoke or flames, get out and call the fire brigade on 18 or 112.
And whatever happens, the main service breaker gets reset, never opened. It's sealed and it belongs to the network, like the meter. We don't touch it either.
And us: when to call
We're a neighbourhood electrician, and we work on weekdays. There's no evening or weekend on-call service, and we'd rather tell you so here. That doesn't stop you getting the power back: Enedis works around the clock, and the procedure at the panel restores power to the rest of the home. What's left is repairing the faulty circuit, and that can wait until we come.
Call us during the day if the fault survives these checks, or if you'd rather not touch the panel. We'll first look with you, over the phone, at what can be sorted without a visit. If we do need to come, our €132 incl. VAT call-out covers travel and the first half-hour, and if we can't find the fault, we don't charge for the call-out. The details are on our call-out prices page. For a more localised fault, see our electrical repair page, and for everything else, our electrical troubleshooting page.
Request your free quote. Reply within 48h, detailed quote within a week.
Request a quote